Original: $796.00
-65%$796.00
$278.60The Story
Kick starting a 74-inch motor with 7.5:1 compression ratio is one thing; kicking a healthy 93-inch motor is quite another. Our kicker covers are designed with structural overkill to handle the bending forces imposed on that kicker shaft when the weight of your body on that kick pedal has a fist fight with the gods of spark and combustion.
Features
BAKER manufactures several kicker covers and supplies different kicker covers.
Function Formed Hydraulic Version
-Structurally gusseted FF design with a vulgar display of mechanical purpose
– 1.5” actuator piston included
– 11/16” master cylinder recommended
– Includes BAKER Heavy Duty Throw out bearing
Mechanical Cast Cover
– 1-piece bronze kicker shaft bushing with an outer seal
– Smooth and strong BAKER Classic Kicker Gears, includes mainshaft gear and ratchet hub
– Includes kicker shaft, kicker gear and return spring assembled
– Mechanical release shaft with O-Ring
– Forged release fork
Technical
Kicker Gears
All BAKER kicker covers come with our Classic Kicker Gears standard; unless you are using an Electric Start cover. These gears are made out of 1018 HR Steel, tumble finished to around a 20 micro and heat treated to 50-55 RC; these gears roll smooth as glass.
Billet Hydraulic Covers
All hydraulic covers use a 1.5″ piston, this requires the use of an 11/16″ bore master cylinder (Clutch Perch) in order to function correctly. The Covers are threaded to fit a 3/8-24″ banjo bolt, 10MM sized banjo and washers. BAKER recommends the use of Dot 5 synthetic fluid only.
Cone Style Throwout Bearing
All BAKER Mechanical Kicker Covers fit the early cone style throwout bearing from 1936-E75.
Early Cone Style Bearing
Fitment: All part numbers below fit 1936-86 FX, FL Style 4-Speeds, BAKER 4-Speeds & BAKER 6N4
| Old PN | NEW PN | Description | Finish |
|
479-56P-K |
479H02-56-A |
Billet Function Formed Hydraulic Kicker Cover |
Polished |
|
480-56MP-K |
480M01-56-A |
Mechanical Cast Kicker Cover Assembly |
Chrome |
– All part numbers above do not come with a kicker arm assembly unless it is for a complete transmission build.
Recommended Upgrades
– Straight Kicker Arm; standard length
– BAKER Kicker Pedal
Click on any of the images below to learn more
|
Straight Kicker Arm |
BAKER Kicker Pedal |
Instructions
Billet Kicker Cover Instructions: Click Here
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Description
Kick starting a 74-inch motor with 7.5:1 compression ratio is one thing; kicking a healthy 93-inch motor is quite another. Our kicker covers are designed with structural overkill to handle the bending forces imposed on that kicker shaft when the weight of your body on that kick pedal has a fist fight with the gods of spark and combustion.
Features
BAKER manufactures several kicker covers and supplies different kicker covers.
Function Formed Hydraulic Version
-Structurally gusseted FF design with a vulgar display of mechanical purpose
– 1.5” actuator piston included
– 11/16” master cylinder recommended
– Includes BAKER Heavy Duty Throw out bearing
Mechanical Cast Cover
– 1-piece bronze kicker shaft bushing with an outer seal
– Smooth and strong BAKER Classic Kicker Gears, includes mainshaft gear and ratchet hub
– Includes kicker shaft, kicker gear and return spring assembled
– Mechanical release shaft with O-Ring
– Forged release fork
Technical
Kicker Gears
All BAKER kicker covers come with our Classic Kicker Gears standard; unless you are using an Electric Start cover. These gears are made out of 1018 HR Steel, tumble finished to around a 20 micro and heat treated to 50-55 RC; these gears roll smooth as glass.
Billet Hydraulic Covers
All hydraulic covers use a 1.5″ piston, this requires the use of an 11/16″ bore master cylinder (Clutch Perch) in order to function correctly. The Covers are threaded to fit a 3/8-24″ banjo bolt, 10MM sized banjo and washers. BAKER recommends the use of Dot 5 synthetic fluid only.
Cone Style Throwout Bearing
All BAKER Mechanical Kicker Covers fit the early cone style throwout bearing from 1936-E75.
Early Cone Style Bearing
Fitment: All part numbers below fit 1936-86 FX, FL Style 4-Speeds, BAKER 4-Speeds & BAKER 6N4
| Old PN | NEW PN | Description | Finish |
|
479-56P-K |
479H02-56-A |
Billet Function Formed Hydraulic Kicker Cover |
Polished |
|
480-56MP-K |
480M01-56-A |
Mechanical Cast Kicker Cover Assembly |
Chrome |
– All part numbers above do not come with a kicker arm assembly unless it is for a complete transmission build.
Recommended Upgrades
– Straight Kicker Arm; standard length
– BAKER Kicker Pedal
Click on any of the images below to learn more
|
Straight Kicker Arm |
BAKER Kicker Pedal |
Instructions
Billet Kicker Cover Instructions: Click Here
